Apple MD094LL/A Manuale Utente
iMac (27-inch, Mid 2010) Take Apart — Glass Panel
143
2010-09-09
7
Wearing clean gloves,
place glass directly
onto unit, aligning
tabs along the
bottom with notches
in rear housing.
Magnets will catch it
and hold it in place.
Make sure the glass is
flush with the rear
housing after it is
reinstalled.
place glass directly
onto unit, aligning
tabs along the
bottom with notches
in rear housing.
Magnets will catch it
and hold it in place.
Make sure the glass is
flush with the rear
housing after it is
reinstalled.
8
Clean outside of glass
panel with a clean,
damp microfiber
cloth. Wipe glass until
there is no longer any
residue or haze.
panel with a clean,
damp microfiber
cloth. Wipe glass until
there is no longer any
residue or haze.
9
Inspect glass for
any remaining dust,
fingerprints, or a
hazy residue. If there
are contaminants
trapped between
LCD panel and glass
panel, repeat cleaning
procedure.
any remaining dust,
fingerprints, or a
hazy residue. If there
are contaminants
trapped between
LCD panel and glass
panel, repeat cleaning
procedure.