Apple MD094LL/A Manuale Utente
iMac (27-inch, Mid 2010) Basics — Overview
17
2010-09-09
Pairing the Magic Trackpad
To pair your trackpad:
1. Choose Apple () > System Preferences, and then click Trackpad.
1. Choose Apple () > System Preferences, and then click Trackpad.
2. Click “Set Up Bluetooth Trackpad …” in the lower-right corner.
3. Press the On/off button on your trackpad to turn it on.
4. Click Continue when your trackpad is detected.
Once your trackpad is paired with your Mac, use Software Update again to make sure you have
the latest software installed.
the latest software installed.
Note: If the iMac (27-inch, Mid 2010) needs to have system software reinstalled for some reason,
pair the Magic Trackpad and then run Software Update. If for some reason you notice that only
basic functionality is present on the Magic Trackpad, ensure that it’s paired correctly before
launching Software Update.
pair the Magic Trackpad and then run Software Update. If for some reason you notice that only
basic functionality is present on the Magic Trackpad, ensure that it’s paired correctly before
launching Software Update.
Installing Batteries
1. Use a coin to remove the battery compartment cover on the left side.
2. Insert batteries into the battery compartment as shown.
Warning: Replace or recharge batteries at the same time. Don’t mix old batteries with new
batteries and don’t mix battery types (for example, alkaline and lithium batteries). Don’t open
or puncture the batteries, install them backwards, or expose them to fire, high temperatures, or
water. Don’t charge nonrechargeable AA batteries. Keep batteries out of the reach of children.
batteries and don’t mix battery types (for example, alkaline and lithium batteries). Don’t open
or puncture the batteries, install them backwards, or expose them to fire, high temperatures, or
water. Don’t charge nonrechargeable AA batteries. Keep batteries out of the reach of children.