Apple MD094LL/A Manuale Utente
iMac (27-inch, Mid 2010) Take Apart — Power Supply
179
2010-09-09
2
Disconnect 2 cables:
•
DC power (top cable)
•
AC power inlet (taped
to pressure wall)
to pressure wall)
Reassembly
1
Route AC power inlet
cable over power
supply pressure wall.
cable over power
supply pressure wall.
2
Connect AC power
cable and tuck edge
of connector under
logic board.
cable and tuck edge
of connector under
logic board.
3
Press cable into
notches on pressure
wall.
notches on pressure
wall.
4
Replace tape over
AC power cable and
pressure wall.
AC power cable and
pressure wall.
5
Replace 4 screws.