Apple MD094LL/A Manuale Utente
iMac (27-inch, Mid 2010) Take Apart — Optical/MXM Pressure Wall
226
2010-09-09
Removal
Note: Observe
the Bluetooth and
microphone cable
routing before removing
the pressure wall. The
Bluetooth cable routes
over the pressure wall and
the microphone cable
routes under (illustration
shows a non-SSD config).
On SSD configs the
Bluetooth cable routes
over the top of the SSD
drive.
the Bluetooth and
microphone cable
routing before removing
the pressure wall. The
Bluetooth cable routes
over the pressure wall and
the microphone cable
routes under (illustration
shows a non-SSD config).
On SSD configs the
Bluetooth cable routes
over the top of the SSD
drive.
1
Remove 1 T8 screw
on pressure wall.
on pressure wall.
•
922-9241
2
(Illustration shows
SSD drive config) Use
a black stick to pry
pressure wall off rear
housing. Dotted line
represents location of
adhesive.
Exert some force to
release pressure wall.
SSD drive config) Use
a black stick to pry
pressure wall off rear
housing. Dotted line
represents location of
adhesive.
Exert some force to
release pressure wall.
3
If replacing pressure
wall and the SSD
drive is installed,
wall and the SSD
drive is installed,
from pressure wall
and transfer SSD to
new pressure wall.
and transfer SSD to
new pressure wall.