Apple MD094LL/A Manuale Utente
iMac (27-inch, Mid 2010) Symptom Charts — Startup and Power
45
2010-09-09
3. Use known-good SDRAM in the
system. Verify if system start
without kernel panic now.
Yes
Install user’s SDRAM one by
one and retest. If kernel panic
repeats, replace affected
SDRAM. Verify if correct
SDRAM specification is being
used.
X01
No
Go to step 4.
4. Wait for 20 seconds after
shutdown and disconnect
AirPort cable on logic board.
Verify if system starts without
kernel panic now.
Yes
Go to
symptom flow.
No
Go to step 5.
5. Disconnect SATA cable from
hard drive and startup to the
Install DVD in the optical drive
or from an external volume.
Verify if system starts without
kernel panic now.
Yes
Go to
symptom flow.
No
Go to step 6.
6. Disconnect camera and
microphone cables from logic
board. Verify if system starts
without kernel panic now.
Yes
Go to
or
symptom
flow as appropriate.
No
Go to step 7.
7. Disconnect Bluetooth cable
on logic board. Verify if system
starts without kernel panic
now.
Yes
Go to
symptom flow.
No
Go to step 8.
8. Disconnect SD board on logic
board. Verify if system starts
without kernel panic now.
Yes
Go to
symptom flow.
No
Go to step 9.
9. Disconnect optical drive and
test. Verify if system starts
without kernel panic now.
Yes
Go to
symptom flow.
No
Replace logic board.
M06