Blade ICE G8124 Manuale Utente
BLADEOS 6.5.2 Application Guide
116
Chapter 8: Spanning Tree Protocols
BMD00220, October 2010
Figure 10
Spanning Tree Restoring the Switch-to-Switch Link
In this example, port 10 on each G8124 is used for the switch-to-switch link. To ensure that the
G8124 switch-to-switch link is blocked during normal operation, the port path cost is set to a higher
value than other paths in the network. To configure the port path cost on the switch-to-switch links
in this example, use the following commands on each G8124.
G8124 switch-to-switch link is blocked during normal operation, the port path cost is set to a higher
value than other paths in the network. To configure the port path cost on the switch-to-switch links
in this example, use the following commands on each G8124.
Enterprise
Routing
Switches
Server
Server
Server
Server
BLADE
Switch 1
BLADE
Switch 2
STP
Restores Link
Uplink
Failure
RS G8124(config)# interface port 10
RS G8124(config-if)# spanning-tree stp 1 path-cost 60000
RS G8124(config-if)# exit