Blade ICE G8124 Manuale Utente

BMD00220, October 2010

Chapter 13: VMready  

  177

Once a VMAP filter is created, it can be assigned or removed using the following commands:

For regular VLANs, use config-vlan mode:

For a VM group, use the global configuration mode:

Each VMAP can be assigned to only one VLAN or VM group. However, each VLAN or 

VM group may have multiple VMAPs assigned to it.

The optional 

serverports

 or 

non-serverports

 parameter can be specified to apply the 

action (to add or remove the VMAP) for either the switch server ports (

serverports

) or switch 

uplink ports (

non-serverports

). If omitted, the operation will be applied to all ports in the 

associated VLAN or VM group.

VMAPs have a lower priority than port-based ACLs. If both an ACL and a VMAP match a 

particular packet, both filter actions will be applied as long as there is no conflict. In the event of a 
conflict, the port ACL will take priority, though switch statistics will count matches for both the 
ACL and VMAP.

RS G8124(config)# vlan

RS G8124(config-vlan)# [no] vmap

[serverports|

non-serverports]

RS G8124(config)# [no] virt vmgroup

[serverports|non-serverports]