Blade ICE G8124 Manuale Utente
BLADEOS 6.5.2 Application Guide
310
Chapter 21: Protocol Independent Multicast
BMD00220, October 2010
Using PIM with Other Features
PIM with ACLs or VMAPs
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
PIM with IGMP
If using IGMP (see
IGMP static joins can be configured with a PIM-SM or PIM-DM multicast group IPv4 address.
Using the ISCLI:
Using the ISCLI:
Using the CLI
IGMP Query is disabled by default. If IGMP Querier is needed with PIM, be sure to enable the
IGMP Query feature globally, as well as on each VLAN where it is needed.
IGMP Query feature globally, as well as on each VLAN where it is needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable IGMP snooping
globally, as well as on each VLAN where PIM receivers are attached.
globally, as well as on each VLAN where PIM receivers are attached.
RS G8124(config)# ip mroute
<multicast group IPv4 address> <VLAN> <port>
>> # /cfg/l3/mroute
<multicast group IPv4 address> <VLAN> <port>