Apple 7200/120 Manuale Utente
![Apple](https://files.manualsbrain.com/attachments/2c022a7d1a76dcd8f02c04aa8d97faf41b63902f/common/fit/150/50/8a691e9df6162751590e2cef93a951cf3a39c94b6949421016232655b22d/brand_logo.png)
Troubleshooting
Symptom Charts/Video - 11
Video
Screen is black, boot
tone is present, drive
operates, fan is
running, and LED is
lit
1 Adjust brightness on monitor.
2 Clear parameter RAM. Hold down <Command> <Option> <P>
<R> during startup but before "Welcome to Macintosh"
appears.
3 Reset Cuda chip. (Refer to The Cuda Chip in Basics for
instructions.)
4 Reset logic board. (Refer to Resetting the Logic Board in
Basics for instructions.)
5 Replace monitor cable.
6 Remove all DRAM DIMMs and try replacing them one at a
time to test. Replace any bad DIMMs.
7 Test with known-good monitor. Replace monitor if
necessary. Refer to appropriate monitor manual to
troubleshoot defective monitor.
8 Replace logic board. Retain customer's DIMMs.