Apple 7200/90 Manuale Utente

 

 Basics

Memory Configurations - 9

 

Memory Configurations

 

The Power Macintosh 7200 and WS 7250 logic boards have 

four DRAM DIMM slots, each with a 64-bit data bus. You can 

increase the computer’s DRAM to a total of 256 MB using 5-

volt, 64-bit-wide, 168-pin fast-paged mode, 70 ns 

DIMMs.

 

 These computers do not have any main memory 

soldered to the logic board. At least one DRAM DIMM must be 

present for the computer to operate.

DRAM DIMMs can be installed individually or in pairs. These 

computers support linear memory only; therefore, no 

memory gains are seen when two DIMMs of the same size are 

installed (that is, memory interleaving is not supported on 

the Power Macintosh 7200 Series/WS 7250 computers).