Apple 7200/90 Manuale Utente

 Take Apart

VRAM DIMMs - 57

 Position the DIMM evenly over the slot 

and press down gently to install it. The release latch should 

click into place. Do not force the DIMM or you may damage it. 

Make sure the DIMM is evenly seated.

These computers use VRAM DIMMs (112-pin, 70 ns 

or faster) instead of VRAM SIMMs. The VRAM SIMMs used in 

earlier Power Macintosh models are not compatible.

 1 MB of VRAM is soldered to the board. To go to 2 MB, 

install one 1 MB VRAM DIMM in slot 1. To go to 4 MB, install 

three 1MB VRAM DIMMs in slots 1, 2, and 3. VRAM slots 2 

and 3 must be populated together.