Apple WS 9650 Manuale Utente
Take Apart
Ultra SCSI Card (WS 9650 Only) - 10
Replacement Note:
Reconnect the Ultra Wide
SCSI cable to the Ultra SCSI
PCI card as shown.
Important:
Be sure to
secure the Ultra Wide cable
with the Velcro tie wrap that
is on the bottom drive
carrier so that the cable
doesn’t interfere with the
fan.
The internal hard disk drive (SCSI ID 0)
is connected to the Ultra Wide SCSI-3 bus.
is connected to the Ultra Wide SCSI-3 bus.
One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives
can be installed on the floor of the server and
connected to the Ultra Wide SCSI-3 bus. (Some
Workgroup Server models come with a second Hard
Disk Drive [SCSI ID 1] installed here.)
can be installed on the floor of the server and
connected to the Ultra Wide SCSI-3 bus. (Some
Workgroup Server models come with a second Hard
Disk Drive [SCSI ID 1] installed here.)
SCSI
PCI
Card
PCI
Card
Tape backup Drive
(optional)
(optional)
CD-ROM Drive
Floppy Disk Drive
You can install a SCSI
device in this expansion
bay and connect it to the
Ultra Wide SCSI-3 bus.
device in this expansion
bay and connect it to the
Ultra Wide SCSI-3 bus.