Apple WS 9650 Manuale Utente

 

 Upgrades

Bottom Drives - 8

 

5 Connect the Ultra Wide 

SCSI cable to the drive.

 

 The unit comes 

with the top rear drive 

set to SCSI ID 0. Be sure 

to set the SCSI ID on the 

lower hard drive to a 

number that is not 

currently being used by 

the system. Refer to the 

Basics chapter for a full 

explanation of SCSI IDs 

and termination.

The internal hard disk drive (SCSI ID 0)
is connected to the Ultra Wide SCSI-3 bus.

One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives 
can be installed on the floor of the server and 
connected to the Ultra Wide SCSI-3 bus. (Some 
Workgroup Server models come with a second Hard 
Disk Drive [SCSI ID 1] installed here.)

SCSI 
PCI 
Card

Tape backup Drive 
(optional)

CD-ROM Drive

Floppy Disk Drive

You can install a SCSI
device in this expansion
bay and connect it to the
Ultra Wide SCSI-3 bus.