Apple 9500/180MP Manuale Utente

 

 Troubleshooting

Symptom Charts/Error Chords - 4

 

One-part error 

chord sounds during 

startup sequence

1 Disconnect SCSI data cable from hard drive and reboot 

system. If startup sequence is normal, initialize hard drive 

using Drive Setup and then run Drive Setup Updater utility 

program. Test unit again with SCSI data cable connected. If 

error chord still sounds, replace hard drive.

2 Disconnect floppy drive cable from floppy drive and reboot

system. If startup sequence is normal, replace floppy drive.

3 Reseat processor card.

4 Replace processor card.

5 Replace logic board. Retain customer's DIMMs. Note: When 

you replace the logic board, be sure the LED cable is not 

interfering with the power actuator.