Apple 17-INCH LATE 2006 CD Manuale Utente
iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply
Using a T10 screwdriver, remove the three self-tapping screws on the top and left sides of the
power supply board and the one machine screw on the lower right corner of the board.
power supply board and the one machine screw on the lower right corner of the board.
Remove the power supply from the enclosure.
If you are replacing the power supply-to-logic board cable, disconnect the cable from the
logic board and remove the cable from the enclosure.
Note: To disconnect the cable, do the following:
• Rotate the computer so that the stand is away from you.
• Locate the power supply connector underneath the logic board.
• Use a black stick to release the connector.
logic board and remove the cable from the enclosure.
Note: To disconnect the cable, do the following:
• Rotate the computer so that the stand is away from you.
• Locate the power supply connector underneath the logic board.
• Use a black stick to release the connector.
3.
4.
5.
922-7066