Apple 500 Manuale Utente

 Take Apart

Chassis Harness Assembly - 46

3 Route the floppy drive cable through its opening at the 

back of the floppy drive bay.

4 Carefully route the analog and CD-ROM/hard drive 

cables through the large opening behind the CD-ROM 

drive bay

5 Turn over the chassis so that the top is up and the 

speakers are at the front, facing you.

   Be sure to reconnect the CD-ROM, hard drive, 

and analog connectors in the proper order. When you 

position the CD-ROM, hard drive, and analog connectors, be 

sure that the power cables are placed toward the outside of 

the chassis and the data ribbon cables are placed toward the 

inside of the chassis.
6 Locate the CD-ROM, hard drive, and analog connectors.
7 Position the CD-ROM connector with the connector slot