Apple 575 Manuale Utente

 Take Apart

Chassis Harness Assembly - 47

facing the front of the chassis and the power cables 

facing toward the outside edge of the chassis. Slip the 

connector extension through the slot in the side of the 

chassis and slide the connector into place.

8 Position the hard drive connector with the connector slot 

facing the rear of the chassis and the power cables facing 

toward the outside edge of the chassis. Slip the connector 

extension through the slot in the side of the chassis and 

slide the connector into place.

9 Position the analog board connector with the connector 

slot facing the rear and the power cables facing toward 

the outside edge of the chassis. You will have to route the 

cable under the connector (between the connector and the 

cable bridge). Slightly push forward one of the keyed 

tabs and slide the connector into place.