Apple 17-INCH MID 2006 Manuale Utente

iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel

Note: If replacing a bad LCD display, you will also need to remove the lower EMI shield
(if still attached), the display panel mounting brackets, and the LVDS cable as follows.

If attached, peel the lower EMI shield off the bottom edge of the display panel.

Using a torx T10 screwdriver, push the tape aside and remove two screws from the left side
panel mounting bracket. Repeat for the other side.

Peel back the tape where shown below, and disconnect the two white inverter-to-display
cable connectors.

92-7158