Blade ICE G8124-E Manuale Utente

BLADEOS 6.5.2 Application Guide

BMD00220, October 2010

Chapter 12: Virtual NICs

163

Add ports, trunks, and virtual pipes to their vNIC groups.

Once VLAN 1000 and 1774 are configured for vNIC groups, they will not be available for
configuration in the regular VLAN menus (

/cfg/l2/vlan

Note –

vNICs are not supported simultaneously on the same switch ports as VMready, or on the

same switch as DCBX or FCoE.

Save the configuration.

RS G8124(config)# vnic vnicgroup 1

(Select vNIC group)

RS G8124(vnic group config)# vlan 1000

(Specify the VLAN)

RS G8124(vnic group config)# member 1.1

(Add vNIC pipes to the group)

RS G8124(vnic group config)# member 2.1

RS G8124(vnic group config)# port 4

RS G8124(vnic group config)# port 10

RS G8124(vnic group config)# failover

(Enable vNIC failover for the group)

RS G8124(vnic group config)# enable

(Enable the vNIC group)

RS G8124(vnic group config)# exit

RS G8124(config)# vnic vnicgroup 2

RS G8124(vnic group config)# vlan 1774

RS G8124(vnic group config)# member 1.2

RS G8124(vnic group config)# member 2.2

RS G8124(vnic group config)# member 3.2

vNIC 3.2 is not enabled.

Confirm enabling vNIC3.2 [y/n]: y

RS G8124(vnic group config)# port 5

RS G8124(vnic group config)# trunk 1

RS G8124(vnic group config)# failover

RS G8124(vnic group config)# enable

RS G8124(vnic group config)# exit