Blade ICE G8124-E Manuale Utente

BMD00220, October 2010

Chapter 2: Initial Setup  

  43

When Setup is started, the system prompts:

Enter 

 if you will be configuring VLANs. Otherwise enter 

.

If you decide not to configure VLANs during this session, you can configure them later using the 
configuration menus, or by restarting the Setup facility. For more information on configuring 
VLANs, see the BLADEOS Application Guide. 

Next, the Setup utility prompts you to input basic system information.

Enter the year of the current date at the prompt:

Enter the four-digits that represent the year. To keep the current year, press <Enter>.

Enter the month of the current system date at the prompt:

Enter the month as a number from 1 to 12. To keep the current month, press <Enter>.

Enter the day of the current date at the prompt:

Enter the date as a number from 1 to 31. To keep the current day, press <Enter>.

The system displays the date and time settings:

Enter the hour of the current system time at the prompt:

Enter the hour as a number from 00 to 23. To keep the current hour, press <Enter>.

"Set Up" will walk you through the configuration of

System Date and Time, Spanning Tree, Port Speed/Mode,
VLANs, and IP interfaces. [type Ctrl-C to abort "Set Up"]

System Date:

Enter year [2009]:

System Date:

Enter month [1]:

Enter day [3]:

System clock set to 18:55:36 Wed Jan 28, 2009.

System Time:

Enter hour in 24-hour format [18]: