Extron electronic MBB 100 Dépliant

N

This kit allows A/V products to be vertically mounted to the front or rear rack 

supports and face either the front or the rear of the rack.  Refer to the drawing on the 

opposite side of this card.

  Remove any installed rubber feet from 

the unit.

  Remove two screws from 

one side of the unit.  Retain 

the screws for possible later 

reassembly.

  Attach one bracket to the side of 

the unit using the longer screws 

included in the kit.

  Repeat steps 2 and 3 on the other side of 

the unit.

  Mount the unit to the rack using the two included 

rack screws.

68-938-01, Rev. B

01 10