Emerson 240V Manuale Utente

2. Remove the metal ramp from the bottom of 

the UPS.

This UPS is very heavy (see weight in 

Table 1). At least two people should 

assist in unloading it from the pallet.

3. Fit the ramp flange in the slot in the rear 

of the pallet (back of unit) as shown below.

1. Use a ratchet or wrench, 1/2" (13mm), to 

remove the four mounting bolts from the 

front and rear pallet brackets. Remove the 

mounting brackets from the pallet and 

UPS. Keep the brackets for future 

transportation of the UPS or for additional 

stability of the UPS once in place. 

4. Using two people, slowly move the UPS 

down the ramp until the UPS is on a level 

surface.