Freedom9 80 Manuale Utente
20
the same community name can connect to the device.
Permission: The permissions granted to users connecting using this interface (No Access,
Read, Read/Write).
Read, Read/Write).
Description: A brief description of the connecting users for the administrator’s reference.
Receiver IP Address: The IP address of the computer that should receive trap events.
Community: The SNMP community name that the device belongs to. Only SNMP clients with
the same community name can receive the trap event.
the same community name can receive the trap event.
Severity: Set the level of trap events to accept:
• Information: Receive all traps.
• Warning: Receive only “warning” and “severe” traps.
• Severe: Receive only “severe” traps.
• Warning: Receive only “warning” and “severe” traps.
• Severe: Receive only “severe” traps.
Acceptance: Set whether or not to turn the traps on.
Description: A brief description of the trap recipient for the administrator’s reference.
Events: Clicking this button opens up a window where you can select exactly which traps to
send (Figure 21). The events listed under “ENV Events” require a freeView Power M2 module to
be installed in the device.
send (Figure 21). The events listed under “ENV Events” require a freeView Power M2 module to
be installed in the device.
Figure 21 – SNMP Events