AEG 1.04 Manuale Utente

 

31 

 

1. 

To set up the unit, position it in its installation 
location and use a spanner to turn the height-
adjustable feet until they reach the floor. The feet  

are located at the four corners of the baseplate. 

2.    Push the communication module into the top left-

hand corner of the uppermost slot (see illustration 
above). 

3. 

Push all PROTECT 1.040 UPS modules into the 
slots one after the other in order to complete 
installation of the modules (see illustrations below). 

 You must install the modules one after the other. Only 

once one module has been engaged completely in the frame 
can the next one be installed. 

Bra ke pad

Locking foot