AEG 1.04 Manuale Utente

3) Press ESC

Press ▼ for the following

information

Note: When the mains is connected for the first time, the UPS does
not output any voltage (Figs. correspond to this status)

5) Press ▼ again

6) Press ▼ again

for the following information

for the following inform.

Note: The status of each UPS module is displayed cyclically in the
bottom two lines.

7) Press the ▼ key again for the following information

Note: Battery status is
CHARGING, DISCHARGE
or BATT OPEN (battery not
connected).

LOAD: 0% BATT: 137
I / P VOLT: 232 232 231
O / P VOLT: 0
O / P FREQ: 0.0Hz
STATUS: NO OUTPUT

OUTPUT PARAMETER

           RN        SN    TN
VOLT:   0V
CURR:   0A
FREQ: 0.0Hz

INPUT PARAMETER

VOLT:

232

232 231

FREQ: 50.0Hz
RST INPUT

POWER PARAMETER

kVA

TOTAL: 0.00 0.00
UPS1: 0.00

0.00

UPS2: 0.00 0.00

BATTERY PARAMETER
BAT VOLT: 136V
VOLUME: 100%
STATUS: CHARGING