Xantrex Technology SW Plus 5548 Manuale Utente

Pagina di 344
Battery Information
C–2
976-0043-01-02
Introduction
Batteries
Batteries are available in different sizes, amp-hour ratings, voltage, liquid 
or gel, vented or non-vented, chemistries, etc. They are also available for 
starting applications (such as an automobile starting battery) and deep 
discharge applications. 
Recommendations
Consider the following recommendations for battery use.
Use only the deep discharge types for inverter applications. 
Use the same battery type for all batteries in the bank. 
Use only batteries from the same lot and date in your battery bank. 
This information is usually printed on a label located on the battery. 
Battery Types
There are two principal types of batteries: starting and deep-discharge 
(with several different types of chemistries). Batteries can be either sealed 
or non-sealed (vented). 
Deep discharge
The battery types recommended for use in an inverter system are: Flooded 
Lead Acid (FLA), Sealed Gel Cells (GEL), Sealed Absorbed Glass Mat 
(AGM); and alkaline types Nickel-iron (NiFe) and Nickel-Cadmium 
(NiCad). 
Starting
Automotive (starting) batteries are designed to provide high starting 
current for short periods of time and are not appropriate for inverter 
applications.
Deep-cycle Flooded Lead Acid (FLA)
Description
A flooded lead acid battery is designed to be deep-discharged before 
being recharged, making it suitable for inverter applications. Flooded 
batteries require periodic maintenance consisting mainly of adding 
distilled water to the cells. 
Attributes
Types of FLA Batteries
Attributes
Golf Cart
Popular for smaller off-grid home 
systems 
Many medium sized inverter 
systems use “L16” batteries 
Rugged, long lasting 
Typically rated at 6 volts 
(220 to 350 amp hours)