Antec BP430 Manuale Utente

1

Antec Basiq series power supplies are built to be compatible with the ATX12V 
version 2.2 specification. They include two 12V output circuits that deliver safer 
and more reliable output to your system’s components. In addition we’ve 
included a variety of protective circuitry: OCP (Over Current Protection), 
OVP (Over Voltage Protection), and SCP (Short Circuit Protection).

BP430 includes Universal Input with Active Power Factor Correction (PFC).
Universal Input allows you to connect your Antec Basic power supply to any AC 
power outlet between 100~240V without having to worry about setting a voltage 
switch. Active PFC improves the power factor value to the power supply by altering 
the input current wave shape, helping the power plant provide power to users 
more efficiently.

This power supply comes with a main power switch. Make sure you turn the 
switch to the ON ( I ) position before you boot up your computer for the first time. 
In normal operation there is no need to turn the switch to the OFF (O) position 
since the power supply is equipped with a soft on/off feature which turns your 
computer on and off through the soft switch on your computer case. You may 
need to turn the switch to the OFF position occasionally should your computer 
crash and you cannot shut it down through use of the soft switch.

1.    Turn off the hard power switch on your old power supply if any.

2.

Open your computer case. Follow the directions provided in your case manual.

3.

Disconnect all power connectors from the motherboard and from the peripheral 
devices such as case fans, hard drives, optical drives, floppy drives, etc. 

4.    Disconnect the power cord from your old power supply. 

5.

Remove the existing power supply from your computer case and replace it 
with your new Antec power supply. (Illustration 1)

6.

Turn the hard switch on the Antec power supply to the OFF (O) position and 
connect the AC power cord to the power supply. 

1