Panasonic PT-F200U Manuale Utente

Q

The squeezed signal will be projected in 16:9 ratio.

Q

The input signal will be sized down 75 % and 
projected. S4:3 mode is effective when projecting 
4:3 image on to a 16:9 screen.

Q

The S1 signal which contains an identifying signal 
will be detected and automatically project the 
image in proper ratio. (Available with S-VIDEO 
signals only)

When the input signal resolution is lower than the 
projector resolution, it will be projected at the projector 
resolution. You can deactivate the RESIZING and 
project the lower resolution input signal at its original 
resolution. Press I H to select the required setting.

 

Active

 

Deactive

If the projected image is degraded, you can activate 
FRAME LOCK for synchronization. Press I H to select 
the required option.

 

Deactive

 

Active

• If you project an image with an unmatched aspect ratio, 

the image may distort or some portions may be 
cropped. Select an aspect ratio which preserves the 
intention of the image creator.

• The order of ASPECT types is defined not only by the 

input method but also by the input signals. See “List of 
compatible signals” on page 44.

• If you project a copyrighted image enlarged or distorted 

by using ASPECT function in commercial use in a 
public place, such as a restaurant or hotel, you might 
infringe on the copyright of the creator which is 
protected by copyright law.

• Usually the recommended setting is ON.
• When the RESIZING is set to ON, the lower resolution 

input signal may be projected in less quality.

• The size of the image will be projected smaller and you 

may need to adjust ZOOM and FOCUS, or the 
projector position backwards and forwards.

• DIGITAL ZOOM, KEYSTONE and INDEX-WINDOW 

are not available.

• This function is available with some of the COMPUTER 

signals only.