Nikon NP64 Manuale Utente

3. Projecting an Image (Basic Operation)

Selecting Default Source

You can set a source as the default source so that the default source will be displayed each time the projector is
turned on.

1. Press the MENU button.
The menu will be displayed.
2. Press the

▶ button twice to select [SETUP] and press

the

▼ button or the ENTER button to select [GENERAL].

3. Press the

▶ button three times to select [OPTIONS(2)].

4. Press the

▼ button six times to select [DEFAULT

SOURCE SELECT] and press the ENTER button.

The [DEFAULT SOURCE SELECT] screen will be dis-

played.

(

→ page

5. Select a source as the default source, and press the

ENTER button.
NOTE: To specify [VIEWER] as the default source on the NP64

or NP54, select [VIEWER] from the [DEFAULT SOURCE SELECT]

screen, and press the ENTER button because detecting the signal

automatically is not available for the Viewer source on the NP64

and NP54.

6. Press the EXIT button a few times to close the menu.

7. Restart the projector.
The source you selected in step 5 will be displayed.

TIP: When the projector is in Standby mode, applying a computer

signal from a computer connected to the COMPUTER IN input will

power on the projector and simultaneously project the computer’s

image.

([AUTO POWER ON(COMP.)]

→ page

)

NP63/NP43

NP64/NP54