Nikon NP64 Manuale Utente

3. Projecting an Image (Basic Operation)

ZOOM

Use the ZOOM lever to adjust the image size on the screen.

NOTE: Rotating the ZOOM lever will cause the focus to be adjusted

automatically. For more detail, see “AUTO FOCUS” below.

• Moving the projector back and forth can change the image size

on the screen.

• Adjust the tilt foot if the image is distorted vertically.

AUTO FOCUS

The focus sensor on the projector detects the distance to the screen and automatically adjusts the focus of an im-
age.

• The AUTO FOCUS function will work when the following tasks are done:

- Turning on the power
- Changing the zoom lever
- Repositioning the projector
- Changing the projection angle

Effective auto focus range for screen 4:3

Throw distance

Image size (inch)

Tele (Zoom at min.)

Wide (Zoom at max.)

Minimum distance

57.1"/1.5 m

33"

40"

Maximum distance

216.5"/5.5 m

123"

149"

When the throw distance is beyond 5.5 m/216.5", it means that the focus sensor will not work correctly and that
you need to use the FOCUS button to adjust the focus manually.

NOTE: In some cases, the AUTO FOCUS may not work correctly or the AUTO FOCUS range can be made narrower, depending

on the environmental conditions.

The AUTO FOCUS function will not work under the following circumstances

• When using a transparent screen.

• When there are objects between the focus sensor of the projector and the screen.

• When moving the projector so slowly that the focus sensor cannot detect the distance to the screen.

• When moving the screen, not the projector, because the focus sensor cannot detect the distance to the screen

TIP: To turn off the AUTO FOCUS function, from the menu select [SETUP]

→ [OPTIONS(1)] → [AUTO FOCUS] and select [OFF].