Nikon NP64 Manuale Utente

4. Convenient Features

 Changing Eco Mode

This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].

[ECO MODE]

Description

Status of LAMP indicator

[OFF]

This is the default setting (100% Brightness).

Off

STATUS

LAMP

[ON]

Select this mode to increase the lamp life (NP64/
NP63: approx. 75% Brightness, NP54/NP43: ap-
prox. 85% Brightness)

Steady Green light

STATUS

LAMP

OFF

AUTO ADJ.

COMPUTER

VIDEO S-VIDEO VIEWER

ID SET

CLEAR

AV-MUTE FREEZE

ENTER

EXIT

ECO MODEKEYSTONEPICTURE

VOL.

HELP FOCUS ASPECT

ZOOM

-CLICK

MOUSE

NIF

POWER

＋

To turn on the [ECO MODE], do the following:
1. Press the ECO MODE button on the remote control to display

[ECO MODE] screen.

2. Use the  or  button to select [ON].
3. Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF].

Repeat Step 3.

NOTE:

• The [ECO MODE] can be changed by using the menu.

Select [SETUP]

→ [GENERAL] → [ECO MODE].

• The lamp life remaining and lamp hours used can be checked in [USAGE

TIME]. Select [INFO.]

→[USAGE TIME].

• The projector will always enter into the [ECO MODE] [OFF] condition for 60

seconds immediately after the projector is turned on. The lamp condition will

not be affected even when [ECO MODE] is changed within this time period.

• After a lapse of 60 seconds from when the projector displays a blue, black or

logo screen, [ECO MODE] will automatically switch to [ON]. This is done only

when [ECO MODE] is set to [OFF].

• If the projector is overheated in [OFF] mode, there may be a case where the

[ECO MODE] automatically changes to [ON] mode to protect the projector.

When the projector is in [ON] mode, the picture brightness decreases. When

the projector comes back to normal temperature, the [ECO MODE] returns to

[OFF] mode.

Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to

[ON] mode because the internal temperature is too high.