Nikon NP64 Manuale Utente
78
7. Maintenance
This section describes the simple maintenance procedures you should follow to clean the focus sensor, lens and
replace the lamp and the cooling pump.
replace the lamp and the cooling pump.
➊
Cleaning the Lens and Focus Sensor
Cleaning the lens
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
Cleaning the focus sensor
Use a blower or lens paper to clean the focus sensor.
Keep finger prints off the focus sensor. Leaving finger prints in the focus sensor might cause poor focus or short
auto focus range.
Keep finger prints off the focus sensor. Leaving finger prints in the focus sensor might cause poor focus or short
auto focus range.
➋
Cleaning the Cabinet
1. Turn off the projector before cleaning.
2. Vacuum the ventilation inlet of the cabinet.
2. Vacuum the ventilation inlet of the cabinet.
CAUTION:
When cleaning the speaker us-
ing a vacuum cleaner, do not
force the brush of the vacuum
cleaner into the slits of the cabi-
net.
Applying strong pressure or pos-
sibly impacting the speaker may
cause a malfunction.
ing a vacuum cleaner, do not
force the brush of the vacuum
cleaner into the slits of the cabi-
net.
Applying strong pressure or pos-
sibly impacting the speaker may
cause a malfunction.