Nikon NP4100 Manuale Utente

3. Projecting an Image (Basic Operation) 

48

Once the projector is no longer required, it is important to shut it down correctly to avoid 
damage or unnecessary wear and tear to the projector. 

 

•  Do not unplug the power cable from the wall outlet or projector when 

the projector is powered on. Doing so can cause damage to the AC IN 
connector of the projector and (or) the prong plug of the power cable. 
To turn off the AC power supply when the projector is powered on, 
use a power strip equipped with a switch and a breaker. 

•  Do not turn off the AC power supply within 10 seconds of making ad-

justment or setting changes and closing the menu. Doing so can 
cause loss of adjustments and settings and return to default. 

 

Refer to the following guide to shut down the projector. 

Press the On/Standby button 
once. The OSD displays the 
message shown on the right. 

 

Press the On/Standby button 
again or Enter on the OSD con-
trol panel or the remote control 
to verify power off. 
The cooling fans keep operating 
for a while (Cooling-off time). 
The cooling fans stop operating 
when the projector turns off 

The projector enters Standby 
mode and the power LED lights 
orange. 

Press the Main Power switch to 
the off position (O) to turn off 
the projector.