PLUS Vision Data Projector Manuale Utente
E-20
Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Equipment Has a YCbCr Connector or YPbPr Connector
• Make connections to the RGB connector of the projector using a component cable, which is available separately.
• The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "Compo-
• The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "Compo-
nent" using the menu sequence of [Setup]
→ [Input Format] → [RGB].
See "Input Format" on Page E-49.
• This projector automatically distinguishes the YCbCr input signal and the YPbPr input signal and projects it.
When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or
another color, change the setting under the menu of [Color]
another color, change the setting under the menu of [Color]
→ [Color Space].
See "Color Space" on Page E-45.
• Press the RGB button for input selection using the remote control.
RGB
DVI
Cr
Cb
Y
Pr
Pb
Y
COMPONENT
COMPONENT
Component cable (Available as an option)
Order code: 28-690
Order code: 28-690
Component cable (Available as an option)
Order code: 28-690
Order code: 28-690
Green
Blue
Red
Green
Blue
Red