Panasonic PT-LZ370U Manuale Utente

Set the mode for start-up when the <MAIN POWER> 

switch is turned <ON>.

1)  Press ▲▼ to select [INITIAL START UP].
2)  Press ◀▶ to switch [INITIAL START UP].

▶

z

The setting will change as follows each time 

you press the button.

Starts up the projector in the 

mode it was in before the <MAIN 

POWER> switch is turned to 

<OFF>.

Starts up in the standby mode.

Starts projection immediately.

You can set the projection method in accordance with 

the installation status of the projector.

Change the projection method if the screen display is 

upside down or inverted.

1)  Press ▲▼ to select [PROJECTION 

2)  Press ◀▶ to switch [PROJECTION 

▶

z

The setting will change as follows each time 

you press the button.

[FRONT/DESK] When installing on the desk, etc., 

in front of the screen

When installing using the ceiling 

mount bracket (optional) in front of 

the screen

When installing on the desk, 

etc., behind the screen (using a 

translucent screen)

When installing using the ceiling 

mount bracket (optional) behind 

the screen (using a translucent 

screen)

If you use the projector at high elevations (1 400 m 

(4 593 ft) or higher and lower than 2 700 m (8 858 ft)), 

[ON] must be set.

1)  Press ▲▼ to select [HIGH ALTITUDE 

2)  Press ◀▶ to switch [HIGH ALTITUDE 

▶

z

The setting will change as follows each time 

you press the button.

When using at a place lower than 

1 400 m (4 593 ft) above sea level

When using at elevations (1 400 m 

(4 593 ft) or higher and lower than 

2 700 m (8 858 ft) above sea level)

 

z

Make sure to set this to [OFF] when you use the 

projector at elevations lower than 1 400 m (4 593 ft) 

above sea level, and set this to [ON] when you use 

the projector at elevations of 1 400 m (4 593 ft) or 

higher and lower than 2 700 m (8 858 ft). Failure to 

do so may shorten the life of the internal parts and 

result in malfunctions.

 

z

Do not install the projector at elevations of 2 700 m 

(8 858 ft) or higher above sea level. Failure to do so 

may shorten the life of the internal parts and result 

in malfunctions.

 

z

The speed of the fan is raised and the operation 

sound will become louder when this is set to [ON].