NEC NC2500S Manuale Utente

4. Using Menus

4-2. Table of adjustment menus

Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.

Main menu

Title Select

Configuration

(Title Setup)

Information

Submenu

"Title Memory Name"

TEST Pattern

Lamp Setup

(Setup)

(Installation)

(Memory)

Macro Key

Lamp

Macro Key

Usage

Error Code

Version

IP Address

MMS Status

Adjust

Feedback

Douser Mode

Turret

Ext. MMS Link

Panel Key Lock

GPIO Port

FactoryDefault

Image Orient

Lens Center

MMS Select

Baudrate

Date/Time

(New Bulb)

(Bulb Warning)

(New Lamp House)

Bulb Alignment

Lamp

Lens

Macro Key No.1-8

Output

Bulb Type [A]

Bulb Type [W]

Bulb Type [H]

Macro Key No.1-8

System

MMS(Built-in)

System

Cinema

Description

Selects the title of the signal to be projected.

Selects the test pattern to be projected.

Adjusts lamp brightness.

Sets the lamp brightness constant mode that uses a

brightness sensor.

Selects whether to use the douser (screen mute) when

switching signals.

Controls the turret mounted with an anamorphic lens.

Sets whether to connect an external multi-media switcher (MMS).

Locks the buttons on the projector's control panel so that

they cannot be operated.

Selects the target of GPIO port control.

Returns the settings to their default values (only macro keys

and titles, or all settings).

Selects the projection method (front/rear).

Moves the lens shift position to the center.

Selects the multi-media switcher (MMS) to connect.

Sets the PC control connector (RS-232C) data transmission

speed (bps).

Sets the date and time on the projector.

Resets the lamp bulb usage time and selects or edits new

entries (only when the projector is in standby mode).

Sets the lamp bulb warning time (only when the projector is

in standby mode).

Resets the lamp house usage time, and makes settings or

selects modes (only when the projector is in standby mode).

Sets the lamp bulb alignment.

Saves the current lamp setting.

Saves the current lens setting.

Sets the titles to be assigned to the macro keys of 1 to 8.

Displays the lamp output setting.

Displays the registered name and the maximum/minimum

current setting of the currently used lamp bulb.

Displays the registered name and the lamp rated output (kW)

of the currently used lamp bulb.

Displays the registered name and the lamp bulb warning time

(Bulb Warning Time) setting of the currently used lamp bulb.

Displays the titles assigned to the macro keys of 1 to 8.

Displays the usage times of the projector, lamp bulb, lamp

house and bulb warning.

Displays the currently occurring error.

Displays the version of the projector head. (BIOS, Firmware,

Data, and Serial No.)

Displays the version of the built-in multi-media switcher (MMS).

(BIOS, Firmware, Data, FPGA, and Serial No.)

Displays the SYSTEM IP address.

Displays the CINEMA IP address.

Displays the link-status of the connected multi-media

switcher (MMS).

Reference

page