Promise Technology m210p Manuale Utente

VTrak M310, M210p Product Manual

214

Cache policy is in 
writeback mode without 
battery  

Install or replace the battery. See page 175.

Blowers have started

Normal.

Blowers have stopped

Verify that the cooling unit is properly installed. If the 
blower still does not turn, replace the blowers. See 
page 172.

Blower speed is 
increased

Check the VTrak for overheating. See page 231.

Blower speed is 
decreased

Temporary overheat condition was corrected.

Blowers are NOT 
functioning

Replace the blowers. See page 172.

Blowers have been 
inserted

Normal.

Blowers have been 
removed

Reinstall the cooling unit(s). If the blowers does not 
turn, replace the blowers. See page 172.

Blowers are functioning 
normally

Normal.

Blowers are NOT installed Reinstall the cooling unit(s). If the blowers does not 

turn, replace the blowers. See page 172.

Blower status is unknown Check for airflow out of the cooling unit. If there is 

none, check for proper installation.

BBU flushing has started

VTrak’s cache is being flushed.

BBU flushing has ended

VTrak’s cache has been flushed.

BBU flushing has failed

VTrak’s cache could not be flushed. Check your 
cache flush interval setting. See page 80.

The controller 
parameter(s) changed by 
user

The user successfully change controller settings. See 
page 80.

The controller is reset by 
Watch Dog timer

The Watch Dog timer has started.