NEC 2400 ipx Manuale Utente

CHAPTER 2

NDA-24318

Page 8
Issue 1

CIRCUIT CARD EXPLANATIONS

2.2 Mounting Location/Condition

Mounting location/condition of this card is shown below. Mount this card in the following shaded slots:

Figure 2-2 PA-8IPTB Circuit Card Mounting Locations

Mounting conditions of this card are as follows:

•

When this card is used without a sub board (PZ-8VCTB), and mounted in any of the universal slots 05,
07, 09, 16, 18 or 20:

Although this card physically occupies only one slot, actual ports to be used are those in the even-
numbered group of only the left side of the slot (see

Figure 2-3

•

When this card is used without a sub board (PZ-8VCTB), and mounted in any of the universal slots 10,
11, 12, 21, 22 or 23:

This card occupies only one slot. In regard to the port accommodation, see

Figure 2-3

•

When this card is used with a sub board (PZ-8VCTB):

This card physically occupies a total of two slots. In regard to the port accommodation, see

Figure 2-3

•

One UNIT accommodates a maximum of two IPTRK circuit cards (slots 04~12 / slots 15~23).
Therefore, the third IPTRK circuit card must be accommodated in a different UNIT of the same/other
PIM.

00 01 02 03 04 05 06 07 08 09 10 11

13 14 15 16 17 18 19 20 21 22 23

PIM

Universal Slots