NEC 2400 ipx Manuale Utente
CHAPTER 3
NDA-24318
Page 30
Issue 1
Issue 1
OFFICE DATA PROGRAMMING
3.1 Required Hardware
This feature is available by using the following hardware. As shown, both speech and FCCS signal
channels between the nodes must be provided by IPTRK circuit cards with 10 BASE-T cables.
channels between the nodes must be provided by IPTRK circuit cards with 10 BASE-T cables.
Figure 3-7 Example Required Hardware for FCCS Networking via IP [F-36]
Note:
An IPTRK circuit card, assigned as the FCCS signal control card by the AFCH command, can also control
the B-channels of the same card, and also a maximum of 15 other cards. The IPTRK circuit card is used
as the speech circuit card as well.
the B-channels of the same card, and also a maximum of 15 other cards. The IPTRK circuit card is used
as the speech circuit card as well.
2
4
A
C
IPCON
FCON
Ethernet Cable
2
A C
IPCON
(10 BASE-T
Connector)
Node A
Node B
CPR
Node C
Arrows indicate
Point-to-Multipoint
connection
Router
FCCS signal
Both Speech/
FCCS signal
FCCS signal
Both Speech/
FCCS signal
FCCS signal
Both Speech/
FCCS signal
FCCS signal
Both Speech/
FCCS signal
FCCS signal
Both Speech/FCCS signal
Both Speech/
FCCS signal
FCCS signal
LANI
(Slot 00/03)
Node A
HUB
IPTRK
IPTRK
To Node B
To Node C
Router
FCCS signal
(Slot 00/03)
Node B
HUB
IPTRK
IPTRK
To Node A
To Node C
FCCS signal
(Slot 00/03)
Node C
HUB
To Node B
To Node A
Router
IPTRK
IPTRK
Intranet
Symbols:
IPTRK:
IPTRK:
IP Trunk
LANI: LAN
Interface
(PZ-PC19)
:10 BASE-T Cable (for both Speech and FCCS signal)
:10 BASE-T Cable (for FCCS signal)
Note
IPTRK
IPTRK
LANI
HUB
CPR
IPTRK
IPTRK
LANI
CPR
HUB
IPTRK
IPTRK
HUB
HUB
CPU
LANI
CPU
Intranet