NEC 2400 ipx Manuale Utente
CHAPTER 3
NDA-24318
Page 40
Issue 1
Issue 1
OFFICE DATA PROGRAMMING
STEP 9:
AGIP
- Assign IP addresses of IPTRK circuit card and its connected route.
LENS (Line Equipment Number):
Assign the first LEN of IPTRK-accommodated
HW block
HW block
KIND (Kind of Selection):
IPTRK (FCCS)
IPTK_IP (IP Address of IPTRK):
IP address of the IPTRK circuit card
DG_IP (IP Address of Default Gateway):
IP address of the router
NETMSK (Net Mask of IP Address):
Net Mask of IP address
ToS CONTROL:
IP Precedence or DiffServ (either)
QoS1 (QoS Data for signal route):
When IP Precedence is selected, 0-7
When DiffServ is selected, 0x00-0x3F
When DiffServ is selected, 0x00-0x3F
QoS2 (QoS Data for speech Path):
When IP Precedence is selected, 0-7
When DiffServ is selected, 0x00-0x3F
When DiffServ is selected, 0x00-0x3F
MULT (Kind of Multiple Connection):
Point-to-Multipoint
Note 1
NETID (Network ID):
Fixed to 0
CSLINK_NUM (Maximum number of client/server connection):
16 line
ARP (Frame Type of ARP):
Select DIX when the “Detail” box is checked
Note 2
Note 1:
Be sure to select “Point-to-Mult”.
Note 2:
RTP check box is provided for detail assignment of the following parameters, if required. Usually the
default data of “0” is set for all parameters.
default data of “0” is set for all parameters.
PKGLOSS (Amount of Packet Loss):
8% (default)
JIT_MAX (Maximum Jitter Buffer):
600 ms (default)
JIT_MIN (Minimum Jitter Buffer):
80 ms (default)
MNGS (Interval of Jitter adjustment):
5 times (default)
JIT_COUNT (Interval of Jitter statistics):
1 sec (default)
BASE_COUNT (Interval of Time-base correction): 10 sec (default)
JIT_FAST (Judging rate of fast arrived packet):
JIT_FAST (Judging rate of fast arrived packet):
100% (default)
TIME_FAST (Time-base correction Judgment):
50% (default)