Galil DMC-1400 Manuale Utente
DMC-1400 Series Command Reference UI
● 207
UI
FUNCTION: User Interrupt
DESCRIPTION:
The UI command causes an interrupt on the selected IRQ line. There are 16 user interrupts
where UI n, n = 0 through 15. Prior to using the UI command, one IRQ line must be
jumpered on the DMC-141X. An interrupt service routine must also be incorporated in
your host program. The IV command should be sent from this routine for interrupt status
and to re-enable the interrupt. Refer to Chapter 4 in the product manual for details.
jumpered on the DMC-141X. An interrupt service routine must also be incorporated in
your host program. The IV command should be sent from this routine for interrupt status
and to re-enable the interrupt. Refer to Chapter 4 in the product manual for details.
ARGUMENTS: UI n where
n is an integer between 0 and 15.
USAGE:
While Moving
Yes
Default Value
0
In a Program
Yes
Default Format
---
Command Line
Yes
Can be Interrogated
No
Used as an Operand
No
Controller Usage
DMC-1410/1411/1417
EXAMPLES:
#I Label
PR 10000
PR 10000
Position relative
SP 5000
Speed
BG Begin
motion
AS
Wait for at speed
UI 1
Send interrupt 1
EN End
program
This program sends an interrupt to the selected IRQ line. The host should have an interrupt service
routine written to handle the interrupts. The IV command may be used to return interrupt information
and re-enable the interrupts.
routine written to handle the interrupts. The IV command may be used to return interrupt information
and re-enable the interrupts.