Galil DMC-1400 Manuale Utente
220 ● WT
DMC-1400 Series Command Reference
WT
FUNCTION: Wait
DESCRIPTION:
The WT command is a trippoint used to time events. After this command is executed, the
controller will wait for the number of samples specified before executing the next
command. If the TM command has not been used to change the sample rate from 1
msec, then the units of the Wait command are milliseconds.
command. If the TM command has not been used to change the sample rate from 1
msec, then the units of the Wait command are milliseconds.
ARGUMENTS: WT n where
n is an integer in the range 0 to 2 Billion decimal
USAGE:
While Moving
Yes
Default Value
---
In a Program
Yes
Default Format
---
Command Line
Yes
Can be Interrogated
No
Used as an Operand
No
Controller Usage
ALL CONTROLLERS
EXAMPLES:
Assume that 10 seconds after a move is over a relay must be closed.
#A Program
A
PR 50000
Position relative move
BG Begin
the
move
AM
After the move is over
WT 10000
Wait 10 seconds
SB 1
Turn on relay
EN End
Program
HINT: To achieve longer wait intervals, just stack multiple WT commands.