ADC MM701G Manuale Utente
Manage Software and Configuration
96
MM701G and MM702G User Manual
M
ANAGE
S
OFTWARE
AND
C
ONFIGURATION
Update System Software
Using the Web interface HTTP Upgrade capability, you can upgrade
the software (.bin) and http files on your modem. To complete an
upgrade, specify the IP address of a server on the LAN side of
modem where the new firmware is stored.
the software (.bin) and http files on your modem. To complete an
upgrade, specify the IP address of a server on the LAN side of
modem where the new firmware is stored.
1
Click
System
on the menu bar, then
Software Update
under
[System]
to access the
Software
Update
page.
2
Click
Browse
, locate the server on the LAN where the firmware image or configuration file
is located, then click
Open.
The software update process takes about 90 seconds to complete and after the
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.
It is strongly recommended that you use this procedure to upgrade software
rather than upgrading through a telnet session or through the Console port.
rather than upgrading through a telnet session or through the Console port.
System
Software Update