ADC Circuit Breaker Panel With Reset Switch Manuale Utente
ADCP-80-570 • Issue 2 • March 2006
Page 3
© 2006, ADC Telecommunications, Inc.
1.3
Packaged Hardware
The shipped product includes hardware components that are packaged separately and shipped in
the carton with the basic panel.
the carton with the basic panel.
• 5/16-inch long, Phillips drive, 8-32 flat-head screws (8)—Used to secure the mounting
brackets to the panel.
• 3/8-inch long, combination drive, 12-24 pan-head screws (4) and #12 flat washers (4)—
Used to secure the panel mounting brackets to the equipment rack.
• #10 ring terminals (2) for #12–#10 AWG wire—Can be used to connect the grounding
cables to the grounding studs.
• 2-Hole Lugs for #6 AWG wire (4)—Used to connect input power cable to input power
terminal blocks.
Figure 2. Packaged Hardware
ORIENTATION FOR
19-INCH RACK INSTALLATION
ORIENTATION FOR
23-INCH RACK INSTALLATION
3/8-INCH (9.525 MM) 12-24
SCREWS AND #12 WASHERS
5/16-INCH (7.936 MM) 8-32
FLAT-HEAD SCREWS
20633-A
UNIVERSAL MOUNTING BRACKETS
AND SCREWS
DESIGNATION CARD
AND CARD HOLDER
2-HOLE LUGS FOR
6 AWG WIRE
#10 RING TERMINALS FOR
12-10 AWG WIRE
REAR COVER FOR OUTPUT
POWER/ALARM TERMINAL BLOCK
REAR COVERS FOR INPUT
POWER TERMINAL BLOCK
POWER TERMINAL BLOCK
VOLTAGE
LABEL