Manualsbrain.com
  1. Manuali
  2. Marche
  3. Xantech
  4. DCH4
  5. Manuale Utente

Xantech DCH4 Manuale Utente

Scarica
Pagina di 10
 
 
 
08905107C 
 
  - 
3 
- 
PROGRAMMING 
A. Accessing Programming 
1. Accessing the Programming Mode with a Security Code 
 
Step 1. 
Come off-hook with any house phone (device) connected to terminals 4 & 5, 
LINE OUT TO PHONES. 
Step 2. 
Enter *# followed by the 6-digit security code (factory set to 845464). 
Step 3. 
A double beep will indicate that you have accessed the programming mode. 
Step 4. 
You can now Touch Tone program the features listed in section B below. 
Step 5. 
When finished programming, hang up. 
 
2. Accessing the Programming Mode Locally (Security Code Bypass Mode) 
 
Note: This mode is useful for programming the DCH4 without a telephone line connected. 
 
Step 1. 
Move DIP switch 2 from OFF to ON (Security Code Bypass Mode, see DIP 
Switch Programming section D). 
Step 2. 
Come off-hook with any house phone connected to terminals 4 & 5, LINE 
OUT TO PHONES 
Step 3. 
A double beep will indicate that you have accessed the programming mode. 
Step 4. 
You can now Touch Tone program the features listed in section B below. 
Step 5. 
When finished programming, hang up and move DIP switch 2 to the OFF 
position. 
 
3. Accessing the Programming Mode Remotely 
 
Step 1. 
Call into the DCH4 from a Touch Tone phone. Note: Call in from another line 
to avoid C.O. busy signals, etc. 
Step 2. 
Answer the call from any house phone (device) connected to terminals 4 & 5, 
LINE OUT TO PHONES. 
Step 3. 
From either phone enter *# followed by the six digit security code (factory set 
to 845464, see Programming section C). 
Step 4. 
A double beep will indicate that you have accessed the programming mode. 
Step 5. 
You can now Touch Tone program the features listed in section B below. 
 
Note: Programming from a cell-phone may not be suitable in areas with weak coverage.