Cabletron Systems TSX-1620 Manuale Utente

Using the TSX-1620 Hub View

2-6

Using the Hub View

The TSX-1620 Hub View has two different application display modes: Interface 
and Bridge. Each mode features different port display forms and offers different 
menus. The Interface application display is shown by default when the TSX-1620 
Hub View is launched. To switch between the Interface and Bridge application 
displays:

1.

Click on the module index or module type, at the top of the TSX-1620 port 
display column in the Hub View (see 

, below). The Module menu 

will appear.

2.

Drag down to Application Display, then right to Interface or Bridge, 
depending on your intended selection. The Hub View will change to reflect 
your selection.

Figure 2-4. Changing the TSX-1620 Application Display

When you change the application display mode, the port display form will 
change to the default form for the chosen mode. For the Interface application 
display, the default port display form is Oper Status. For the Bridge application 
display, the default port display form is Admin. You can change the port display 
form from either application display mode using the Port Display Form selection 
from the Interface or Bridge menus. For details on the port display form selections 
available for each application display, see 

, later in this chapter.

Each application display mode offers some different menus and menu selections, 
as illustrated in 

, below.