Cabletron Systems 2H22 Manuale Utente

Chapter 1: Changes to Local Management Screens

Used to access the Redirect Configuration Menu screen, which provides 
access to the Port Redirect Configuration and VLAN Redirect 
Configuration screens. For details, refer to 

Used to set a desired limit of received broadcast frames that are forwarded 
out other interfaces. For details, refer to 

Used to access the repeater configuration screens, which enable the user 
to configure operations and security at the connector and port level.

In the 2E43-51and 2E43-51R devices, the screens are the Repeater Level 
Security Configuration and Port Level Security Configuration screens. 

In the 2H23-50R and 2H33-37R devices, the screens are the Repeater 
Configuration Menu screen and its two subordinate screens, Repeater 
Level Security Configuration and Port Level Security Configuration 
screens.

For details on setting the security on the repeater devices, refer to 

The Ethernet Full Duplex Configuration screen, 

, allows the 

user to set the front panel ports, individually or all at once, to either 
Standard Ethernet or Full Duplex operation, and monitor each port to see 
whether or not it is enabled and linked to another Ethernet device. Refer 
to 

 to set the Operation Mode.

To access the Ethernet Full Duplex Configuration screen from the Port 
Configuration Menu screen, use the arrow keys to highlight the 
ETHERNET FULL DUPLEX CONFIGURATION menu item and 
press ENTER. The Ethernet Full Duplex Configuration screen displays.