Cabletron Systems 2H22 Manuale Utente

Chapter 1: Changes to Local Management Screens

To add or delete source port and destination port entries and set the Frame 
Format and Redirect Errors functions, proceed as follows:

Use the arrow keys to highlight the Source Port field near the bottom 
of the screen. 

Press the SPACE bar or BACKSPACE one or more times to increment 
or decrement the port number displayed in the brackets [n] until the 
appropriate port number displays.

Use the arrow keys to highlight the Destination Port field near the 
bottom of the screen.

Use the SPACE bar or BACKSPACE to step to the appropriate port 
number for the destination port. 

Use the arrow keys to highlight the Frame Format field near the 
bottom of the screen.

Use the SPACE bar or BACKSPACE to step to the appropriate frame 
format setting (NORMAL, TAGGED, or UNTAGGED) for the 
selected Destination Port.

Use the arrow keys to highlight the Redirect Errors field near the 
bottom of the screen.

Use the SPACE bar to select either the ON or OFF option and press 
ENTER. ON forces the source port to forward errored frames to the 
destination port(s). OFF forces the errored frames to be dropped 
before forwarding traffic.

Use the arrow keys to highlight the Status field.

Use the SPACE bar to select either the ADD or DEL (delete) option. 
Press ENTER. This adds or deletes the selections for the Source Port, 
Destination Port, Frame Format, and Redirect Errors made in steps 1 
through 8 and also updates the screen.

A destination port can only be assigned to one source port.