Cisco Systems Cisco MGX 8850 Manuale Utente
2-49
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
dspcds
dspcds
Display Cards
Displays high-level information for all the cards in the node. For more detailed information about a card,
execute dspcd on the CLI of that card. The information that dspcds provides is the:
execute dspcd on the CLI of that card. The information that dspcds provides is the:
•
Revision level of the boot firmware
•
Revision level of the system software
•
Date and time of command execution, including GMT offset
•
Backplane serial number and its hardware revision level
•
The IP address of the statistics master (a workstation)
•
Type of card in the front and back slots and the (active/standby) state of each
•
Alarm status for each card and the shelf itself
•
Redundancy configuration for each slot
Cards on Which This Command Runs
PXM45
Syntax
dspcds
Related Commands
dspcd, version
Attributes
Log: no log
State: active, standby, init
Privilege: ANYUSER