Cisco Systems Cisco MGX 8850 Manuale Utente
3-36
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 3
Equipment and Resource Provisioning
cnfrscprtn
cnfrscprtn
Configure Resource Partition
Modifies a resource partition. A resource partition on an AXSM consists of minimum and maximum
percentages of bandwidth, a VPI/VCI range, and a minimum and maximum number of connections
available to a network control application. The current network controller is PNNI. Refer to the
description of addrscprtn for information on resource partitions.
percentages of bandwidth, a VPI/VCI range, and a minimum and maximum number of connections
available to a network control application. The current network controller is PNNI. Refer to the
description of addrscprtn for information on resource partitions.
Note
The cnfpart and cnfrscprtn commands are identical. The name ‘cnfrscprtn’ is consistent with the
corresponding command in Release 1 of the MGX 8850 switch. You can use either command.
corresponding command in Release 1 of the MGX 8850 switch. You can use either command.
Cards on Which This Command Runs
AXSM
Syntax
cnfrscprtn
-if <if>
-id <partionID>
-ctlr <controllerID>
-emin <egrMinBw>
-emax <egrMaxBw>
-imin <ingMinBw>
-imax <ingMaxBw>
-vpmin <minVpi>
-vpmax <maxVpi>
-vcmin <minVci>
-vcmax <maxVci>
-mincon <min connections>
-maxcon <max connections>
Note
The maximum number of connections must be greater than 10.
Syntax Description
Note
On a virtual trunk, the min_vpi and max_vpi must be the same.
-if
Logical interface (port) number. For AXSM, the range is 1–60.
This parameter is the same as the ifNum appearing in other commands.
-id
The number of the partition in the range 1–5.
-ctlr
The number of the controller in the range 1–20.
-emin
A guaranteed percentage of egress bandwidth. Each unit of egrMinBw is 0.00001 of
the total bandwidth on the port. (An egrMinBw of 1000000 = 100%.) This approach
provides a high level of granularity.
the total bandwidth on the port. (An egrMinBw of 1000000 = 100%.) This approach
provides a high level of granularity.